Cannabis butter

Ingredients

• 1/2 cup (113 g) or one stick of butter or margarine
• 1 ounce (28 g) of cannabis buds (finely ground)

Equipment

• IR-thermometer
• Sauce pan
• Grinder
• Wooden ladle
• Spoon
• Metal strainer/cheese cloth
• Container with sealed lid
• Oven thermometer (optional)
• Cake pan
• Tin foil

It is important to note that one should not bring cannabis or cannabudder to heat at or in excess of 350° degrees Fahrenheit (176 °C). This includes the decarboxylation process and/or cooking your cannabutter into baked goods. When a recipe calls for excess heat, simply lower the heat and cook the product for longer.

Decarboxylation is a chemical reaction that releases carbon dioxide (CO2). This means that a chemical reaction takes place in which carboxylic acids lose a carbon atom from a carbon chain. Cannabis contains THCa which is not psychoactive as well as THCa and CBDa which are "decarbed" when introduced to heat and changed to THC and CBD. Smoking will usually handle this process, however, in this case, one must to do it without destroying the active compounds or plant material.

There are debates about whether or not this process is necessary if a person is going to use the cannabudder in a baked good, as the baking process is said to decarb the THC. More research needs to be done on this question. I would suggest decarbing anyway.

Decarboxylation of dry buds

Set the oven to a temperature of around 240° - 250° Fahrenheit (115 °C - 120 °C). This should produce results without losing any medicinal potency. This is a good temperature for baked goods too, although it will cause the recipe to take longer. Grind up the plant material.

This process assumes the cannabis flower is being used, as opposed to kief, hash, or cannabis oil.

1) Preheat the oven. Use an oven thermometer to check the temperature (as classic ovens can be unreliable) and grind up the weed while waiting.

2) Sprinkle your cannabis in a cake pan and then cover it well with silver foil by crimping the foil along the edge of the pan. This will keep any cannabinoid/terpene vapor from escaping.

3) Place this in the oven for 50 to 60 minutes. Less time is needed for older and drier material while more time is needed for fresher material.

4) After the required time has passed, turn the oven off and remove the cannabis. Let it cool down slowly and completely before you unseal the container to allow any cannabinoid/terpene vapor to reabsorb into the cannabis.

Infusions

Simple cannabudder

1) Melt the butter on low heat in a sauce pan.

2) Add the ground buds and simmer on low heat for 45 minutes, stirring frequently.

3) Strain the butter into a glass dish with the strainer or cheese cloth with a tight-fitting lid. Push the back of a spoon against the plant matter and smash it against the strainer to squeeze out every drop of butter available.

4) Discard the plant matter. Use cannabudder immediately or refrigerate/freeze it until it is time to use. Left over plant matter can cause the budder to get moldy if stored in the fridge for too long. If the infusion recipe is scaled up then one pound of butter (4 sticks) can absorb a whole ounce of cannabis; you may want to simmer for up to 60 minutes for this.

Long-simmered cannabudder

Infusion:

1) Use a large pot and fill it halfway with water. You want enough water so that the marijuana will float without touching the bottom of the pot.

2) Add the cannabis and bring the pot to a boil. Reduce the heat and simmer for an hour.

3) Add butter and return the pot to a simmer, stirring occasionally. Simmer for another hour.

4) Cover the pot. Remove it from heat and allow it to cool. To increase potency, repeat this process twice more, simmering for an hour and then cooling again.

5) After you have completed the third simmering session, prepare for straining while the mixture is still hot. Position the metal strainer over the second stock pot and carefully pour the water, butter, and marijuana mixture through the strainer or cheese cloth. This is easiest to do in the sink. The strainer will catch all the plant matter, so use the back of a large spoon to push the marijuana against the mesh and squeeze out all the butter. Compost or discard the plant matter.

Chilling process:

This will separate the cannabudder from the water. Use a large glass bowl or pot that will fit in the refrigerator.

1) Pour the cannabudder/water mixture inside the pot and cool for 24 hours. The cannabudder will rise to the top and solidify.

2) The next day, return to separate the cannabudder. Cut a chunk out of the top layer and remove it from the cold water. Repeat until you have all the budder drying on paper towels. Scrape off any budder that seems too mushy and save it for a recipe where the excess water isn't a problem, like gooey brownies.

3) Melt the chunks of cannabudder over low heat in a large sauce pan. Once the budder is liquid, pour it into the storage container(s).

Hopefully, it'll look like this:
 

As a general rule, 1 pound (453 g) of butter (4 sticks) can absorb 1 ounce (28 g) of cannabis. For medical patients, using 2 ounces of cannabis for each pound of butter (effectively doubling the strength of the cannabutter) is recommended. The recipe shown calls for a smaller amount, but can easily be scaled up or down.

Cannabudder can be used over freshly cooked pasta or popcorn, spread on toast or a bagel, or reserved as batches in the fridge or freezer for use in recipes such as space cake or cannacookies.

• Responsible use
• Cannabis
• Preparation

• High Times
• The Stoner's Cookbook
• Marijuana Grower's HQ